Lines Matching refs:serial

8 …"Error: Opening COMxx: Access denied" is displayed after a serial port is selected to start image …
10     **Figure 1** Failed to open the serial port 
12    ![hi3516-faq-serial-access-denied](figures/hi3516-faq-serial-access-denied.png)
16   The serial port is in use.
20 1. Search for the terminal using serial-xx from the drop-down list in the **TERMINAL** panel.
22     **Figure 2** Checking whether the serial port is in use 
24    ![hi3516-faq-serial-check](figures/hi3516-faq-serial-check.png)
26 2. Click the dustbin icon as shown below to disable the terminal using the serial port.
28     **Figure 3** Disabling the terminal using the serial port 
30    ![hi3516-faq-serial-close-terminal](figures/hi3516-faq-serial-close-terminal.png)
32 3. Click **Burn**, select the serial port, and start burning images again.
36    ![hi3516-faq-serial-reburn](figures/hi3516-faq-serial-reburn.png)
43   The file image cannot be obtained after a serial port is selected to start image burning.
84 ## (Hi3516) No information is displayed through the serial port
88 …The serial port shows that the connection has been established. However, no information is display…
92   The serial port is connected incorrectly.
96   Change the serial port number.
98 … the serial port connected to the board is the same as that connected to the terminal device. If t…
119 3. Log in to the serial port after the burning is complete.
121     **Figure 10** Information displayed through the serial port after the U-Boot is burnt