Lines Matching refs:serial

11 …After I click **Burn** and select a serial port, **Error: Opening COMxx: Access denied** is displa…
15   ![failed-to-open-the-serial-port](figures/failed-to-open-the-serial-port.png)
19   The serial port is in use.
23   1. Search for the terminal using serial-xx from the drop-down list in the **TERMINAL** panel.
25      **Figure 2** Checking whether the serial port is in use
29   2. Click the dustbin icon as shown below to disable the terminal using the serial port.
31      **Figure 3** Disabling the terminal using the serial port
35   3. Click **Burn**, select the serial port, and start burning images again.
46   The image failed to be burnt over a serial port.
61 …The serial port shows that the connection has been established. After the board is restarted, noth…
65   The serial port is connected incorrectly.
69   Change the serial port number.
71 …serial port connected to the board is the same as that connected to the terminal device. If the se…
95   3. Log in to the serial port after the burning is complete.
97      **Figure 5** Information displayed through the serial port after the U-Boot file is burnt
106   The file image cannot be obtained after clicking **Burn** and selecting a serial port.