Lines Matching refs:thermal
29 …endor/hihope/rk3568）](https://gitee.com/openharmony/vendor_hihope/tree/master/rk3568)下创建thermal文件夹。
31 …ony/drivers_peripheral/tree/master/thermal/interfaces/hdi_service/profile)创建目标文件夹，并安装到`//vendor/hi…
39 …config.xml](https://gitee.com/openharmony/drivers_peripheral/blob/master/thermal/interfaces/hdi_se…
49 | thermal_zone | type | thermal zone名称 | string |
50 | thermal_zone | path | 获取真实节点thermal zone温度值的路径 | string |
51 | thermal_node | type | thermal node名称 | string |
52 | thermal_node | path | 获取模拟节点thermal node温度值的路径 | string |
61 <thermal_zone type="soc-thermal" path="sys/class/thermal/thermal_zone0/temp"/>
62 <thermal_zone type="gpu-thermal" path="sys/class/thermal/thermal_zone0/temp"/>
65 <thermal_node type="soc" path="data/service/el0/thermal/sensor/soc/temp"/>
66 <thermal_node type="cpu" path="data/service/el0/thermal/sensor/cpu/temp"/>
67 <thermal_node type="ap" path="data/service/el0/thermal/sensor/ap/temp"/>
68 <thermal_node type="pa" path="data/service/el0/thermal/sensor/pa/temp"/>
69 <thermal_node type="ambient" path="data/service/el0/thermal/sensor/ambient/temp"/>
70 <thermal_node type="charger" path="data/service/el0/thermal/sensor/charger/temp"/>
71 <thermal_node type="battery" path="data/service/el0/thermal/sensor/battery/temp"/>
72 <thermal_node type="shell" path="data/service/el0/thermal/sensor/shell/temp"/>
76 …ys-thermal_log.md)中获取thermal zone温度的路径，获取模拟节点温度的路径参考[热检测的默认配置](https://gitee.com/openharmony/drive…
78 5. 参考[默认热检测配置文件夹中的BUILD.gn](https://gitee.com/openharmony/drivers_peripheral/blob/master/thermal/in…
103 … "//vendor/hihope/rk3568/thermal/profile:thermal_hdf_config", // 添加thermal_hdf_config的编译
110 “//vendor/hihope/rk3568/thermal/”为文件夹路径，“profile”为创建的文件夹名字，“thermal_hdf_config”为编译目标。
127 2. 获取thermal zone的热检测结果：
132 成功获取thermal zone的热检测结果如下，其中Temperature的默认温度单位为0.001摄氏度：
139 Type: gpu-thermal
141 Type: soc-thermal
147 开发过程中可参考的配置文件路径：[默认热检测的配置源码路径](https://gitee.com/openharmony/drivers_peripheral/tree/master/thermal…