/*
 * Copyright (c) 2023 Huawei Device Co., Ltd.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/* *
 * @addtogroup HdiUsbfnMtp
 * @{
 *
 * @brief Provides unified APIs for mtp services to access usb mtp/ptp drivers.
 *
 * A mtp service can obtain a usb mtp/ptp driver object or agent and then call APIs provided by this object or agent to
 * transfer different types of mtp/ptp data packet.
 *
 * @since 4.0
 */

/* *
 * @file IUsbfnMtpInterface.idl
 *
 * @brief Declares the APIs provided by the usb module for obtaining usb information, subscribing to or
 * unsubscribing from usb data, enabling or disabling a usb, setting the usb data reporting mode,
 * and setting usb options such as the accuracy and measurement range.
 *
 * @since 4.0
 * @version 1.0
 */

package ohos.hdi.usb.gadget.mtp.v1_0;

import ohos.hdi.usb.gadget.mtp.v1_0.UsbfnMtpTypes;

/* *
 * @brief Defines the functions for performing basic operations on usb.
 *
 * The operations include obtaining usb information, subscribing to or unsubscribing from usb data,
 * enabling or disabling a usb, setting the usb data reporting mode, and setting usb options such as
 * the accuracy and measurement range.
 */
interface IUsbfnMtpInterface {

    /* *
     * @brief Opens a USB MTP/PTP driver.
     *
     * @param None No parameter needed.
     *
     * @return Returns <b>0</b> if the operation is successful; returns a non-0 value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    Start();

    /* *
     * @brief Closes a USB MTP/PTP driver.
     *
     * @param None No parameter needed.
     *
     * @return Returns <b>0</b> if the operation is successful; returns a non-0 value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    Stop();

    /* *
     * @brief Read data by USB MTP/PTP driver.
     *
     * @param data Indicates the data read by USB MTP/PTP driver.
     *
     * @return Return number of bytes read, -1 or other negative value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    Read([out] unsigned char[] data);

    /* *
     * @brief Write data by USB MTP/PTP driver.
     *
     * @param data Indicates the data write to USB MTP/PTP driver.
     *
     * @return Return number of bytes written, <b>-1</b> or other negative value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    Write([in] unsigned char[] data);

    /* *
     * @brief Receive file by USB MTP/PTP driver.
     * Proxy worked on file management, include fopen/fclose/fseek/fread/fwrite and offset infomation.
     * Stub worked on data process.
     *
     * @param mfs Indicates the mtp file slice info.
     *
     * @return Returns <b>0</b> if receive is successful, <b>-1</b> or other negative value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    ReceiveFile([in] struct UsbFnMtpFileSlice mfs);

    /* *
     * @brief Send file by USB MTP/PTP driver.
     * Proxy worked on file management, include fopen/fclose/fseek/fread/fwrite and offset infomation.
     * Stub worked on data process.
     *
     * @param mfs Indicates the mtp file range info, used is packet header.
     *
     * @return Returns <b>0</b> if send is successful, <b>-1</b> or other negative value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    SendFile([in] struct UsbFnMtpFileSlice mfs);

    /* *
     * @brief Send event data by USB MTP/PTP driver.
     *
     * @param data Indicates the event data write to USB MTP/PTP driver.
     *
     * @return Returns <b>0</b> if send is successful, <b>-1</b> or other negative value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    SendEvent([in] unsigned char[] eventData);

    /* *
     * @brief Init a USB MTP/PTP driver. Used by usb_host.
     *
     * @param None No parameter needed.
     *
     * @return Returns <b>0</b> if the operation is successful; returns a non-0 value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    Init();

    /* *
     * @brief Release a USB MTP/PTP driver. Used by usb_host.
     *
     * @param None No parameter needed.
     *
     * @return Returns <b>0</b> if the operation is successful; returns a non-0 value if the operation fails.
     * @since 4.0
     * @version 1.0
     */
    Release();
}